You’ll soon discover the hidden troubleshooting and step-by-step repair strategies from a Master HVAC technician’s experience taken from repairing thousands of residential and commercial HVAC units in the field…

You’ll be amazed as he easily teaches you exactly how to understand complex repair problems andtroubleshoot residential and commercial air conditioners, refrigerators, ice makers, and water towers, and do it fast and right the first time!

And…If you want to start your own HVAC Business, for repairing air conditioners and refrigerators or commercial HVAC equipment you can get your business started by just what you’ll discover right here.

Get the right tools, and in-depth knowledge you need about how to properly use HVAC test equipment to troubleshoot and locate difficult repair problems.

Get CHEAT SHEETS FOR STEP-BY-STEP TROUBLESHOOTING residential and commercial air conditioners and refrigerators!

Uncover the hidden shortcuts experienced HVAC techs use for finding hard to diagnose problems – they won’t tell you about.

Find out the how keep your HVAC equipment up and operating at peak performance with the least amount of work!

From the desk of: Hooman Gohari

We’ve all seen it and we’ve all wondered about it…

You’re working with a more experienced HVAC technician and he nails the problem in just minutes… that is, afteryou’ve wasted hours of YOUR time, trying to diagnose a difficult to find problem on a complex HVAC repair.

You just don’t know HOW he does it! … Because you’d love to know…

And you don’t want to sweat it out and wait the years of experience in the ‘school of hard knocks’ it took HIM to figure all this out. So what are you going to do?

Well the answer is simple.

Find the right technical knowledge and master technician tricks from years of experience and dump it into your brain… And then you’ll be as smart as this master technician. Right? Well, to be honest it is not that easy…

You know this guy is SUPER SMART and really knows his stuff…and he’s got the hidden tricks and in-depth technical knowledge you’d kill for.

With his years and years of repair expertise you can’t hope to match him anytime soon. You envy him every time somebody calls for help, because most everybody goes to him for advice on how to fix a problem piece of equipment.

This master technician demands respect and commands attention with his trained expertise and he’s worked long and hard for what he knows…

In fact, you’ve probably seen this happen many times in your life. And you’d love to crawl inside his head and suck up his knowledge, wouldn’t you? And the amazing thing about this is… the master technicians are usually just “regular guys”.

I mean, it’s obvious these guys have sweated it out  and had their fair share of ’impossible to fix’ repair jobs –equipment that most other techs ‘gave up on as unfixable…’

And they almost always get it FIXED!

All you want to find out how they do it! Just how do they always seem to know the right thing to test or check that finds the REAL problem and so…

Makes the ‘impossible to fix piece of equipment’ – easy to repair!

Let’s face it. These master technicians are guys that know the hidden secrets and problems with equipment… and have the knowledge to back it up, and they didn’t learn it all in a technical college either. They know how to fix problem equipment from EXPERIENCE… and that’s something you don’t have right now.

Because they can fix problem equipment faster and get better results than you.

Look, I know lots of other technicians are just like you, and have become frustrated by this too…I have watched them spending hours busting their buts trying to figure out a problem repair… with little to NO success to show for it.

And when you’ve got a problem piece of equipment on your hands it NEVER fails that that’s the one piece of equipment that’s gotta be up and running pronto!

In fact, you may be wasting hours of your time and energy trying to figure out troubleshooting problems with equipment with inadequate training or knowledge. This is a big mistake you could be making.

Meanwhile, you can’t believe that other techs and do-it-yourselfers around you… even like some of your buddies… seem to be able to figure out what’s wrong with equipment and fix it faster than you. And you hate that.

They make super-fast repairs to equipment you simply can’t do…. because you don’t know the hidden tips and tricks they do.

It’s obvious they know something you don’t. Their training and expertise is from EXPERIENCE.

So how do you GET THEIR EXPERIENCE?

Wouldn’t it be great to know what these super smart and experienced techs KNOW?

Problem is, YOU DON’T KNOW WHAT YOUR AREN’T DOING RIGHT… that’s keeping you from getting the super-fast and efficient troubleshooting and ‘fixed-it-right-the-first-time repairs’ you want.

All that’s about to change right now.

What if you had access to the repair secrets that only experienced master technicians have? What if you could get inside the head of an expert who has already figured this stuff out? What would you pay to have access to a real troubleshooting expert technician that knows exactly how to troubleshoot a HVAC problem super fast — and knows the right steps to fixing it right the first time?

You can tap into what REALLY works by learning from a master technician, and get real-world, practical fix-it-right-the-first-time advice.

Learning from Master Technicians Will Cut Your Troubleshooting Time In Half - And Get Your Equipment Repaired Faster!

You are about to have access to what works and what doesn’t, from a master technician with over 40 years experience who will tell you EXACTLY what to do to fix most any HVAC equipment problem – super fast, with less trial and error and for the lowest possible cost.

Hi, my name is Hooman Gohari. In my HVAC business, I advise people who want to get build great HVAC troubleshooting and repair skills… to learn from those who are already have them.

And just watch, learn and copy what they’re doing.

Let’s stop and tackle one thing head on… you do NOT want to learn all you know as a HVAC technician or for someone that is working on a ‘do-it-yourself repair’, without expert help. Just training from an Industrial college professor or a technical school trainer will give you book knowledge but not in depth troubleshooting knowledge you need to excel.

This only comes from years and years in the field fixing problem equipment.

Plus, you wouldn’t want to risk your future employment on just what you could learn in a formal school. Only the best techs with the best training and experience get hired these days. So if you are looking for work as a HVAC technician please read on…

You want to uncover a source of in depth knowledge that the books don’t tell you about.

The hidden tricks and tips that can only be discovered when you learn it the hard way — through years and years of experience fixing hundreds of problem equipment.

You can gain this insider knowledge from working with a master technician, but most are too busy to show you or teach you what they know. Many don’t want you to know what they know or they might even be out of a job!(Especially as they get older… they don’t want to be put out to pasture by a younger technician that the company can keep for lower pay!)

So that’s another reason for them to keep close to their vest, these inside tricks only they know. Plus it can be tough to find… and to talk to these experts — IF they will spare the time for you. That is, without you taking the time to hunt them down and paying their enormous training fees.

Well, That’s Why I’m Here…

I can give you the technical experience you need… the experience that money generally can’t buy.

I’ll bet you would love to surround yourself with the knowledge and experience of a master technician who “gets it” — and learn my troubleshooting and repair secrets first hand.

You’ll find out what it is you need to know and the proper order for doing it.

It takes master technicians years… or entire lifetimes… to learn all their inside troubleshooting tips and inside secret repair strategies. And by having access to a 40 year veteran, HVAC master technician…

You’ll Get Results Faster Than If You Try To Learn Everything On Your Own

I will share with you my ‘hard-case repair’ experiences… then you’ll be more likely to understand and figure out tough repairs quicker on your own. Sounds simple, doesn’t it? Yet so few people can really do this.

And it’s why most entry level techs never get the experience they need to become ‘master technicians’themselves. Some are too lazy to put in the extra effort and then they wonder why they can’t seem to make any progress on their way to becoming a master technician. But that’s not you, right? You want to know more…

So Where Do You Find The Super-Smart, Master HVAC Techs To Learn From?

Well, as you probably know, it’s not always easy to find master techs who are willing to share their hard-earned experience with you.  I mean, when master technicians know they’re hot stuff… And they don’t share the tricks they know!

They usually have better things to do… like troubleshooting their own jobs, and fixing their own equipment. They don’t have time to train you – especially if they are not paid extra for it.  I mean, if you were a master technician would you spend your time teaching a new tech how to troubleshoot?

Probably not. 

You’d be keeping all those secrets to yourself right? So how can a regular tech find or a do-it-yourselfer, learn from these “super master technicians”?

Here’s how…

If you can’t talk to them in person, the next best thing is learning from them… on paper. You can find out in depth troubleshooting secrets and ‘hard-to-repair-equipment strategies from me in my latest book ”Air Conditioning and Refrigeration Repair Made Easy.”

It’s over 430 pages packed with HVAC master technician repair info!

Introducing…

Get Your Copy Now!

Only $27

In fact, this is probably the least expensive way to learn from me and do it… SUPER FAST!

Here’s How To Quickly Learn The Secrets From A Master Technician

Could it really be possible to find a real short cut with your HVAC training? 

You want to know in minutes — what is wrong with a piece of equipment without wasting valuable timechecking stuff that works, and get down to the brass tacks about what is really WRONG with it? Right?

You can have the knowledge you need in just days, rather than waiting years to learn it the old school of hard knocks way!  You can sit back and read and gain the knowledge from the experiences from one of the most respected and highly regarded super technicians in the field of HVAC troubleshooting, training and repair.

When you read this book you will discover:

• HVAC Technician’s Rules for Personal Safety – how to keep all yourself safe when working around high voltage equipment, power tools and hazardous chemicals.
• Why it’s a good idea to follow common HVAC technician safety tips like: the habit of keeping one hand in a pocket when troubleshooting any equipment with high-voltage circuitry. (Do not forget that even a small shock can be dangerous. A reflex reaction to it, could cause a fall against a higher voltage source.)
• Did you know that when transporting a refrigerator, avoid laying it down because the compressor oil leaves the compressor. If it is restarted too soon, the compressor will operate without proper lubrication and be destroyed. Find out how long it has be upright before it is safe to turn it on again.
• What the best brands of tools are to buy?
• Why it’s a good idea to never use a hammer to drive a wrench or use a ‘cheater bar’ to break loose a nut or bolt that is stuck. Making this mistake could cost you a lot more money on a repair if you do this!
• Why does it make sense to following a step by step troubleshooting chart?
• What causes the unit to start running again after a compressor shut off?
• Why refrigerant R-134A can not be kept in an open container.
• How is the troubleshooting for a refrigerator, an ice machine, an air conditioner, and a freezer alike?
• What is CRITICAL to do for your safety BEFORE you remove a capacitor?
• The compressor is running continuously – and does not cool. Could the timer be the problem and not the compressor?
• When replacing a timer – why does the cycle it is stuck in important?
• What an overload protector is – and why is it similar to a fuse but does not blow – find out what makes it reusable.
• When inspecting a compressor motor, how do you prevent compressor burn up if the starting relay does not disengage?
• For residential units you may need to install piercing valves in order to test the unit — find out how to do this step-by-step.
• What are the compressor discharge and suction pressures and where would you get these numbers?(It’s in the book!)
• In a properly operating system, the filter-drier should feel slightly warmer to the touch than the ambient temperature — why is that a easy way to check a filter-drier?
• On a defrost heater repair – can a bad defrost bimetal is mistaken for a bad defrost heater?
• Can a capillary tube be cleaned or must they always be replaced and if replaced what size is needed? Does a size that is close work?
• If a loud knocking occurs when the compressor runs, what steps need to be taken before replacing the compressor to prevent the new compressor from failing.

And here’s even more… All From A Master Technician!

• When brazing, you apply the brazing alloy at the top.  What problem could happen if you don’t?

• What caution should you observe about buying an alloy that does not contain cadmium (Cd)? Is this a critical safely hazard? You bet it is!
• When swaging copper tubing what is the trick to getting 2 tubes the same diameter to fit without using fittings?
• How many half turns of the spinner should be sufficient to form a flare?
• Find out how a brazed joint disassembled. (It’s in the book…)
• If the voltage check indicates low voltage below 98 VAC, is this a problem with the power coming into the unit? Or not?
• How to test a capacitor with a light bulb, a ohm meter, or a home-made test cord.
• Compressor terminal color coding checklist & guide for 22 popular brands
• Problems with unmarked compressor terminals? (Just check the chart in the book!)
• Types of hermetic compressor motors and how they are wired
• How to use a hard start kit is a combination relay, start capacitor, and overload protector to start old compressors.
• How to unplug a capillary tube the right way.
• Can you fix loud compressor noises in hermetic systems without replacing the compressor?
• Step-by-step instructions for using pinch-off tool is used to seal off copper tubing
• How to test starter relays: current (magnetic), potential (voltage), thermal and solid-state relays, is there a simpler way to do this without an ohm meter?
• How to test timers in frost-free residential and commercial refrigeration units
• Step by step instructions for testing overload protectors due to short-cycles
• Is there an easy way to test condensers, and evaporator fan motors?
• What are the tips for testing defrost limit switches and thermostats?
• How do find out the right type & amount of refrigerant to use. (See the chart in the book.)
• How do you know the amount of refrigerant into a charging cylinder and how to recharge a unit?
• Find out how to test pressure controls and how to replace them
• How to check double-temperature valves, bulb-type thermostatic valves
• How to properly inspect and service expansion valves (TEVs)
• Understand how to accurately measure superheat in a system
• How to use a TEV with an equalizer
• Want tips on how to test solid-state thermostatic expansion valves (electric valves) or constant-pressure or pressure-reducer valves? (It’s in the book…)
• Tips for checking for coolant restriction in a system

And there’s electrical problems and schematics too!

• What are causes for compressor short-cycling?
• Find out the real causes for short-cycling.
• What do you need to check for before replacing a burnt out compressor?
• Find out the symptoms for an over-charged system.
• Steps to reset the size of ice cubes in an ice-maker.
• How does an automatic-expansion valve differ from a capillary tube?
• What symptoms indicate a loss of refrigerant?
• The causes high head pressure and how to check it.
• Would the symptoms of an overcharged system be the same or different from a system with a dirty condenser?
• What would happen in an ice maker if the bin thermostat contacts were to stick in the closed position?
• What problem would an incorrectly wired relay cause and how to fix it.
• What can be wrong if the low-pressure line from the evaporator feels considerably colder than normal?
• Where are oil separators installed in a sealed system?
• How is a low-pressure control checked and how do you determine the cut-in and cut-out setting on a low-pressure control?
• Find out why frost can appear on an expansion valve while unit runs on vacuum.
• What does the oil-pressure safety control do when the low-side pressure goes higher than the oil pressure in the compressor?
• What are the possible causes for the refrigeration unit to run too long?
• How can you tell tubing is kinked, what symptoms occur and how do check for it.
• How to check a contractor or magnetic switch with an ohm meter.
• What are the five reasons for a dehumidifier to run, but not dehumidify?
• What four causes would keep a compressor from shutting off in a central air-conditioning system?
• Color is the hot (common) wire connected to a wall thermostat.
• How is a wall thermostat for an air conditioner tested?
• What are the two major causes for a contactor becoming inoperative?
• What are the two methods for checking a transformer?
• Substituting SIVA Refrigerants for CFCS
• Step-By-Step methods for how to retrofit the existing units from CFCs to the SUVA refrigerant blends!
• Different types of leak detectors and additives too!
• And much more!  Over 430 pages worth of answers with diagrams, and troubleshooting and specification charts!

Get Your Copy Now!

Only $27

I can assure you, you’ve never seen anything like this before. You’ll get sound troubleshooting and repair techniques as well as step-by-step guidance from…

A master technician so respected and so highly regarded… 
that even the highly skilled HVAC technicians seek him out for advice!

Now you can get on the “inside track” and quickly discover how to isolate and verify a problem with HVAC equipment and what you need to do to fix it – it in just minutes!

This book is written in plain language and includes hundreds of pictures and illustrations to make it easily understood even by a new tech or do-it-yourselfer. The step-by-step testing, troubleshooting, and repair techniques combined with the trouble shooting charts in this book make the most complicated jobs very simple to understand and to repair.

Plus you’ll get:

STEP BY STEP TROUBLESHOOTING GUIDED CHARTS FOR:

• Air Conditioners – Commercial and Residential
• Compressors That Fail To Start
• Refrigerators and Freezers - Manual-Defrost, Cycle-Defrost, Automatic-Defrost
• Ice Makers  – Commercial and Residential
• Water Fountains
• Water Towers  – Commercial
• Coolant – Temperature – Pressure Chart
• Charging Rates Chart for Commercial Roof Mount Air Conditioners

See the example from the book below…

Now you can troubleshoot and repair air conditioners, refrigerators and many other commonly used types of HVAC equipment…. You benefit from the last 40+ years of my experience… I have accumulated literally thousands upon thousands of training and troubleshooting secrets which you get when you download the book.

I have sold my book to technicians and companies all over the world… And I meet with HVAC companies and master technicians every day. I want to always learn what’s new and how to repair the latest equipment problems. With HVAC technology always changing, I stay on track with the newest developments to make sure that the information you receive is updated with the latest technological advances.

My information has been seen in several magazine, 100′s of articles, and in many HVAC technology websites.

I love to seek out HVAC training and troubleshooting secrets and proven methods that master technicians currently use to achieve successful repairs on most any type, model and manufacturer of HVAC equipment…

I can bring help you with your HVAC training and troubleshooting and you can get started just minutes from now.

Getting my secrets on troubleshooting ‘impossible to repair” equipment is an incredible value in itself. You’ll discover TONS of practical, step-by-step troubleshooting and repair techniques for repairing and maintaining HVAC equipment as inexpensively and quickly as possible.

Now is your chance to learn from someone who knows EXACTLY how to fix the ‘unfixable’!

Let’s be honest here… Do you really want to trust your next repair problem with advice from something you read on a trouble shooting message board on the Internet? It could be a 10 year old kid in his grandmother’s basement, pecking away at the keyboard!

 That’s what the internet is becoming… all these blogs, message boards, and forums… each promoting the “fake and false information”. It’s information overload, and you don’t need that.

 So who do you trust? Who do you believe? Who can you learn from to fix it right the first time?

Here’s what other people have to say….

“One of the most surprising things that I discovered
while doing these ebooks with him is that I learned
things that I’ve never heard before.”

Ron White, Tulsa, Oklahoma

“I’ve been repairing equipment for years
and some of these troubleshooting secrets
just blew me away. Great book.”

Wally Hanson, Atlanta, Georgia

This book contains many tricks and tips
and will completely change the way you think
about troubleshooting and HVAC training.

Billy Nelson, Ames, Iowa

Here’s How It All Works…

You’ll get  the “Air Conditioning and Refrigeration Repair Made Easy” downloadable book. It’s over 430 pages packed with expert HVAC master technician repair information. It’s brand new and covers air conditioners, refrigerators, and many of the common types of HVAC equipment you work on. You can easily print it too if you want.

By successfully studying this book and applying its techniques, even those already working in this field can substantially increase their hands on repairing knowledge and technique.

It’s great for Do-it-Yourselfers or for those who would like to pursue this profession as a sideline, just to supplement their incomes. Once people know you work on the side fixing refrigerators, air conditioners and related HVAC equipment — you’ll find less and less time for your “regular” job! In a very short time, you may find the income from part-time work as a HVAC tech could result in working in this profession full time!

Get Your Copy Now!

Only $27

The “Air Conditioning and Refrigeration Repair Made Easy” book is the most powerful HVAC trouble shooting and repair book available for getting you up to speed quickly and easily with HVAC repairs. Get the inside troubleshooting knowledge you want – just in time for that next ‘impossible to repair job‘.

Soon you’ll start having other techs come to you for their questions!

You’ll also how to easily read and use schematics for difficult to repair electrical problems. After you read the book – electrical problems will be a simple for you to repair, because you’ll know all the tricks!

All of the proven secrets for air conditioning and refrigerator repair and trouble shooting are revealed in this ultimate instruction-packed book,  and you get over 430 pages!

Take a few minutes and picture this…

It’s just a few short days from today and you no longer have an ‘average’ troubleshooting skills.

You’re now sharper and smarter than you’ve ever been before.

You will know how to quickly and easily diagnose equipment failures and you’ll be able to fix them quickly and easily in no time at all.

You can  feel proud of your enhanced troubleshooting and repair skills and you’ll feel more confident no matter what new job you tackle!

You’ll feel great as you have other techs asking you for advice on their own troublesome repair jobs!

Imagine The Thrill Of Having A Master TechCome to YOU For Troubleshooting Advice!

Get ready to lock your hands around the rock-solid master technician knowledge you’ve always wanted…

 Now you can have a super sharp trouble shooting edge… you’ll feel of more confidence and pride when you tackle a job knowing you can fix it right the first time… it’s ALL within reach for you.

 As you can see, just downloading this book will give you some of the most important troubleshooting training information you can get.

Who doesn’t want to be a much admired MASTER TECHNICIAN?

 And I’d like you to be one of the select few that get this book, because you need it.

 Right now you’re probably thinking “This sounds too good to be true. I’m sure it’s going to cost me a lot of money”.

 WRONG.

How does less than thirty bucks sound to you? When you download Your OWN Copy of “Air Conditioning and Refrigeration Repair Made Easy” book, it’s only $27.00.

This book will change the way you’re troubleshooting and repairing your HVAC equipment because it is filled to the brim withsuper fast, time-saving and cost-cutting strategies to doing HVAC repairs — done right!

Each page will show you exactly how to analyze down equipment,and how to efficiently and effectively troubleshoot, and complete a low cost and effectively repair.

I want to assure you that you will get the best training possible from your time spent reading this book. And every standard air conditioner and refrigerator HVAC systems is covered… and I’ll  show you how to understand how each works and then how to trouble shoot it in step-by-step fashion – no matter your experience level.

Imagine how good it will feel to have the right knowledge to effortlessly be able do repairs!

No more “impossible to repair” work orders!

It will be like having your very own master technician trainer right at your side for each and every one of your HVAC repair jobs….showing you how to fix the problem the best way possible!

If you’re fed up with trying to do it the hard way — stop searching the Internet for troubleshooting information that is incomplete and can’t help you! Get the right information you know you need on how to repair your equipment, quickly, safely and for the lowest cost!

Whether YOU want to become a master technician… or YOU just want to understand how to repair HVAC equipment for your own home DIY needs, you’ve know that you have found the best solution right here…

This book will show you, step by step, exactly how to understand the inner workings of your HVAC equipment and will give you the confidence you need to know you can fix it – and when you’re done, you’ll end up with a big smile on your face!

You’ll increase your in depth knowledge and you’ll get noticed more for what you know!

My Absolute Iron-Clad 100% Guarantee

I know that you probably want to try my book right now. But, before you go ahead and make a commitment you might feel a little unsure of the quality of this information.And I completely understand… that only makes sense.

Here’s my offer to you: Let me give you the limited time, discounted price on this book for$37 only $27.

Read the book all the way through… take up to 29 days to go over the whole book. If you’re not thrilled with the information in this book, just ask for a refund, you don’t even have to tell me why. I’ll rush you, your refund and we’ll part as friends.

No questions, and no hassles. You can get your money back quickly and easily. That’s my promise to you.

Of course, I’m betting that you’ll want to keep your book, because just a couple tips and shortcuts will help you way more than the small cost of your $27 investment, today. Because you know that the knowledge you will receive will help you over and over again. With just 1 repair you will get your money back in the TIME YOU WILL SAVE!

And it’s an incredible value, just for the checklists and electronic diagrams too…

At Just Pennies Per Tip

It’s literally a step by step road map to becoming a ‘Master HVAC Technician’.

You get the straight answers to the real questions about troubleshooting and complex HVAC repairs in a simple to understand and follow fashion!

Get Your Copy Now!

Only $27

This book is dedicated to those who are serious about succeeding as a HVAC tech or do-it-yourselfer, who does not want to afford the time or expense of a full-time formal training course

What I share is literally PRICELESS when you think about how it will change your HVAC skills and… your career…forever.

For the same price as a dinner out with your gal, or a pizza party with the guys, you’ll have your very own personal HVAC trainer, in your corner, showing you what to do, step-by-step just when you need it most!

If you’re ready to stop asking everybody else for troubleshooting help and ready to stop wasting your time searching the Internet for repair advice –  that isn’t guaranteed to work. Then it’s time to check out my “Air Conditioning and Refrigeration Repair Made Easy” book…

You’ll blast by your work buddies with the knowledge you’ll have!

And if you’re a DIY’er then you’ll save hundreds on repair bills — it’s easy when you know you can do it yourself!

It’s time for you to get the Master Technician Knowledge you’ve been searching for!

Honestly, you probably spend more on parts you don’t end up using every month… and that won’t be worth as much to you as this training information will.

And if you were able to hire a master technician of this caliber to teach you the same secrets you’re going to learn from me… well, let’s just say it would cost you over $1500 or more for just 1 week of his services.

But right now, you can get over 430 pages of my insider tips, tricks and techniques for just $27.

It really does make perfect sense to try it out, right now.

Just click the link below to download your copy now.

To Your Future As A Master Technician,

Mr. Hooman Gohari

YES! Hooman, Please Give Me The Book “Air Conditioning And Refrigeration Repair Made Easy” with the benefit of Your 40 Years Experience Now!

Get Your Copy Now!

Only $27

ACKNOWLEDGMENT

The author and AIR ZONE Refrigeration Company wish to express their deep appreciation to the following companies for their many excellent contributions of illustrations and information, without which the completion of this unique book would not have been possible.

ALCO Controls

Bally Engineered Structures, Incorporated

Beckman Industrial Corporation

Beverage-Air

Buchbinder, Chicago

Coari and Associates

Coleman Heating and Air-Conditioning

Copeland, Division of Emerson Electric Company

DuPont Fluoroproducts

Eaton Corporation, Controls Division

EBCO Manufacturing Company

Gates Rubber Company

Gibson

Henry Valve Company

Honeywell (Controls)

Ice-O-Matic, A Welbilt Company

Johnson Controls

MALCO Products, Incorporated

Marvel Industries, Division of Northland Corporation

OMRON Electronics, Incorporated

Paragon Electric Company, Incorporated

RAM Freezers and Coolers Manufacturing, Incorporated

Robinair Division, SPX Corporation

Tecumseh Product Company

TIF Instruments Inc.

Wagner Products Corporation

White-Rodgers, Division of Emerson Electric Company

Wilshire Corporation, Schaumburg, Illinois